A Deep-Learning Model for Diagnosing Fresh Vertebral Fractures on Magnetic Resonance Images.

BACKGROUND: The accurate diagnosis of fresh vertebral fractures (VFs) was critical to optimizing treatment outcomes. Existing studies, however, demonstrated insufficient accuracy, sensitivity, and specificity in detecting fresh fractures using magnetic resonance imaging (MRI), and fall short in localizing the fracture sites. METHODS: This prospective study comprised 716 patients with fresh VFs. We obtained 849 Short TI Inversion Recovery (STIR) image slices for training and validation of the AI model. The AI models employed were yolov7 and resnet50, to detect fresh VFs. RESULTS: The AI model demonstrated a diagnostic accuracy of 97.6% for fresh VFs, with a sensitivity of 98% and a specificity of 97%. The performance of the model displayed a high degree of consistency when compared to the evaluations by spine surgeons. In the external testing dataset, the model exhibited a classification accuracy of 92.4%, a sensitivity of 93%, and a specificity of 92%. CONCLUSIONS: Our findings highlighted the potential of AI in diagnosing fresh VFs, offering an accurate and efficient way to aid physicians with diagnosis and treatment decisions.

Excess Mortality for Femoral Intertrochanteric Fracture Patients Aged 50 Years and Older Treated Surgically and Conservatively in Tianjin, China: A Cohort Study.

OBJECTIVE: Intertrochanteric fracture is one type of hip fracture, which is the most serious consequence of osteoporosis. Along with the growing elderly population, intertrochanteric fracture is expected to rise increasingly. The aim of this study was to assess excess mortality after intertrochanteric fractures and to identify the predictors of long-term mortality by therapy among patients aged 50 years and older in Tianjin. METHODS: This is a retrospective cohort study on mortality for 3029 patients aged 50 years and older in Tianjin experiencing an intertrochanteric fracture between December 26, 2014 and December 31, 2018. Data were from Tianjin Hospital Hip Fracture (THHF) cohort. Follow-up period was until March 31, 2022. Mortality, excess mortality, and comorbidities were analyzed and stratified by therapy and gender. Time dependent Cox models were performed to estimate the effects of the variables. RESULTS: Absolute mortality for all the patients was 5.90% at 3 months, 12.55% at 12 months, 19.92% at 24 months and 27.28% at 36 months. Absolute mortality for surgical group was 1.57% at 3 months, 4.77% at 12 months, 8.49% at 24 months and 12.07% at 36 months, significantly lower than conservative group: 10.50% at 3 months, 20.73% at 12 months, 31.96% at 24 months and 43.04% at 36 months. We found a substantially lower mortality (hazard ratio [HR] 0.34, 95% confidence internal, [CI]: 0.23-0.52, p = 0.000) among patients undergoing surgical therapy than those undergoing conservative therapy, even when controlled for gender, age, the length of hospital stay, and all the comorbidities. Female patients (HR 0.68, 95% CI: 0.58-0.79, p = 0.000) were less likely to die than male patients after an intertrochanteric fracture. Patients treated by the two methods were both found to have excess mortality rates compared to the general population, although in different levels. The excess mortality rates for patients in the conservative therapy group were 14.46% in males and 17.93% in females, while in the surgical therapy group, 2.78% in females and 4.37% in males. The comorbidities moderate or severe renal disease (HR 2.19, 95% CI: 1.61-2.98, p = 0.000), metastatic solid tumor (HR 6.35, 95% CI: 1.56-25.85, p = 0.010), hypoproteinemia (HR 1.22, 95% CI: 1.01-1.47, p = 0.034), and older age (HR 1.89, 95% CI: 1.73-2.08, p = 0.000) were also risk factors on mortality. A worse-case analysis for the primary outcome were performed as sensitivity analysis and it was consistent with the original conclusion. CONCLUSION: Intertrochanteric factures for people aged 50 years older were found to have excess mortality compared to the general population in Tianjin city, and preventing the fractures in the hip for elderly people was imperative. After controlling tfor comorbidities and age, female gender and surgical therapy were protective factors for the death after fractures, which could provide strong evidence for patients and surgeons to make decisions.

Automatic Detection and Classification of Modic Changes in MRI Images Using Deep Learning: Intelligent Assisted Diagnosis System.

OBJECTIVE: Modic changes (MCs) are the most prevalent classification system for describing intravertebral MRI signal intensity changes. However, interpreting these intricate MRI images is a complex and time-consuming process. This study investigates the performance of single shot multibox detector (SSD) and ResNet18 network-based automatic detection and classification of MCs. Additionally, it compares the inter-observer agreement and observer-classifier agreement in MCs diagnosis to validate the feasibility of deep learning network-assisted detection of classified MCs. METHOD: A retrospective analysis of 140 patients with MCs who underwent MRI diagnosis and met the inclusion and exclusion criteria in Tianjin Hospital from June 2020 to June 2021 was used as the internal dataset. This group consisted of 55 males and 85 females, aged 25 to 89 years, with a mean age of (59.0 ± 13.7) years. An external test dataset of 28 patients, who met the same criteria and were assessed using different MRI equipment at Tianjin Hospital, was also gathered, including 11 males and 17 females, aged 31 to 84 years, with a mean age of 62.7 ± 10.9 years. After Physician 1 (with 15 years of experience) annotated all MRI images, the internal dataset was imported into the deep learning model for training. The model comprises an SSD network for lesion localization and a ResNet18 network for lesion classification. Performance metrics, including accuracy, recall, precision, F1 score, confusion matrix, and inter-observer agreement parameter Kappa value, were used to evaluate the model's performance on the internal and external datasets. Physician 2 (with 1 year of experience) re-labeled the internal and external test datasets to compare the inter-observer agreement and observer-classifier agreement. RESULTS: In the internal dataset, when models were utilized for the detection and classification of MCs, the accuracy, recall, precision and F1 score reached 86.25%, 87.77%, 84.92% and 85.60%, respectively. The Kappa value of the inter-observer agreement was 0.768 (95% CI: 0.656, 0.847),while observer-classifier agreement was 0.717 (95% CI: 0.589, 0.809).In the external test dataset, the model's the accuracy, recall, precision and F1 scores for diagnosing MCs reached 75%, 77.08%, 77.80% and 74.97%, respectively. The inter-observer agreement was 0.681 (95% CI: 0.512, 0.677), and observer-classifier agreement was 0.519 (95% CI: 0.290, 0.690). CONCLUSION: The model demonstrated strong performance in detecting and classifying MCs, achieving high agreement with physicians in MCs diagnosis. These results suggest that deep learning models have the potential to facilitate the application of intelligent assisted diagnosis techniques in the field of spine research.

The effect of annulus fibrosus incision and foraminoplasty on lumbar biomechanics in percutaneous endoscopic lumbar discectomy: a finite element analysis.

The objective of this study was to analyze the effects of annulus fibrosus incision and foraminoplasty on lumbar biomechanics during posterior lateral approach translaminar percutaneous endoscopic lumbar discectomy (PELD) using a lumbar 4/5 segment model and three-dimensional finite element analysis (FEA). We created a model of the L4 to L5 segment and performed simulated foraminoplasty, annulus fibrosus incision, and a combined operation. The models were tested under six working conditions, and we recorded the deformation and equivalent strain/stress of each group. Results showed that foraminoplasty can affect the stability and rotation axis of the segment during rotation without significantly impacting discal stress. Conversely, annulus fibrosus incision significantly increases discal stress except for when the patient is doing a forward flexion movement. We recommend that surgical maneuvers minimize the removal and destruction of the annulus fibrosus and that rotation movements are avoided during the short-term recovery period following PELD surgery.

Spatiotemporal and kinematic gait analysis in patients with knee osteoarthritis and femoral varus deformity.

BACKGROUND: Knee osteoarthritis (OA) is commonly combined with the presentation of a coronal deformity of the knee. The bony origin of the knee varus deformity can be classified as tibial origin, femoral origin, or a combination of tibial and femoral causes. Deformities of tibial origin are mostly common clinically, while patients with knee OA with femoral varus deformity are less common. RESEARCH QUESTION: Do hip, knee and ankle kinematics and spatiotemporal parameters differ between patients with knee OA with femoral varus deformity and healthy subjects? METHODS: Twenty-five patients (14 females and 11 males) with knee OA and femoral varus deformity and 20 healthy subjects (12 males and 8 females) as control group were included in this study. The kinematic parameters of the hip-knee-ankle joint and spatiotemporal gait parameters were included in the study. RESULTS: This study found that the step speed and step length of the knee OA with femoral varus (KOAF) group were smaller than those of the control group, while double support period percentage was greater in the KOAF group. Significant differences were found in the maximum knee extension angle, maximum knee flexion angle, knee flexion range of motion, maximum hip flexion angle, maximum hip extension angle, and hip flexion range of motion between the two groups. After comparing the ankle motion between the two groups, significant differences were found in the maximum eversion angle, inversion range of motion, maximum ankle abduction angle, and abduction range of motion. SIGNIFICANCE: Knee OA with femoral varus deformity causes adaptive changes in the kinematic parameters of hip, knee and ankle joints and spatiotemporal gait parameters to alleviate symptoms and maintain normal activity.

Mechanical analysis of the femoral neck dynamic intersection system with different nail angles and clinical applications.

BACKGROUND: The femoral neck dynamic intersection system (FNS) is mechanically more stable than other internal fixation techniques. Current studies have confirmed that the structural design of FNS has good biomechanical properties in European and American populations. However, whether the suitability of the FNS's 130° main nail angle design for Asian populations has been thoroughly investigated remains unclear. AIM: To compare the biomechanical stability differences among different main nail angles of the FNS in the treatment of femoral neck fractures in Asian populations. METHODS: Computed tomography data of the femur of healthy adult male volunteers were imported into Mimics software to create a three-dimensional model of the femur. The model was adapted to the curve using Geomagic software and imported into Solidworks software to construct the Pauwels I femoral neck fracture model and design the FNS internal fixation model using different main nail angles. Afterward, the models were assembled with the FNS fracture model and meshed using the preprocessing Hypermesh software. Subsequently, they were imported into Abaqus software to analyze and evaluate the biomechanical effects of different angles of the FNS main nail on the treatment of femoral neck fractures. RESULTS: The peak displacement of the proximal femur under different angles of FNS fixation under stress was 7.446 millimeters in the 120° group and 7.416 millimeters in the 125° group; in the 130°, 135°, and 140° FNS fixation groups, the peak displacement was 7.324 millimeters, 8.138 millimeters, and 8.246 millimeters, respectively. In the 120° and 125° FNS fixation groups, the maximum stresses were concentrated at the main nail and the anti-rotation screw, which intersected the fracture line of the femur neck, resulting in peak stresses of 200.7 MPa and 138.8 MPa, respectively. Peak stresses of 208.8 MPa, 219.8 MPa, and 239.3 MPa were observed on the angular locking plate distal to the locking screw in the 130°, 135°, and 140° fixation groups. CONCLUSION: FNS has significant stress distribution properties, a minimal proximal femoral displacement, and an optimal stability for treating femoral neck fractures in Asian populations when performed with a 130° main nail angle.

Biomechanical Study of Minimally Invasive Nonfusion Surgery for Treatment of Disc Herniation Associated with Adjacent Segment Disease: A Finite Element Analysis.

OBJECTIVE: We explored the biomechanical changes of 2 conventional minimally invasive nonfusion surgical methods for treating disc herniation in adjacent segment disease using 3-dimensional finite element analysis. METHODS: A model comprising L3 to the sacrum was validated and used to establish an L4-L5 fusion model, and an adjacent segment disease (ASD) model was developed by modifying the material properties of the intervertebral discs. The ASD model was used to simulate 2 conventional minimally invasive nonfusion surgical methods, which resulted in the creation of 2 postoperative models (M1 and M2). The range of motion and the equivalent stress for each model were recorded under 6 different working conditions. The data are descriptive and were analyzed comparatively under a normal load. RESULTS: Compared with the ASD group, the range of motion of the adjacent segment in the M1 and M2 groups remained unaffected. However, significant Von-Mises stress changes were found in the annulus fibrosus and nucleus pulposus (NP), especially during extension, ipsilateral bending, and rotation. Stress in the NP also shifted toward the surgical incision in the annulus fibrosus during these movements. The maximum Von-Mises stress in the NP of the cephalic segment increased more than did that of the caudal segment. CONCLUSIONS: Minimal nonfusion surgery for ASD might not affect adjacent segment stability significantly. Nonetheless, it can lead to segmental degeneration deterioration and postoperative recurrence. The cephalic segment is affected more than the caudal segment. Therefore, consideration of disc degeneration and appropriate selection of surgical methods for ASD are crucial.

Biomechanical effects of screws of different materials on vertebra-pediculoplasty: a finite element study.

Background: The effects of cannulated screws made of polyetheretherketone (PEEK) on the biomechanical properties of the vertebral body during vertebra-pediculoplasty remain unclear. This study aimed to investigate whether PEEK screws have the potential to replace titanium alloy screws. Methods: The surgical model of two different materials of screws was constructed using the finite element method. The biomechanical effects of the two models on the vertebral body under different working conditions were compared. Results: ① The peak von Mises stress of PEEK screws was significantly lower than that of titanium screws, with a reduction ranging from 52% to 80%. ② The von Mises stress values for the injured T12 spine were similar for both materials. Additionally, the segmental range of motion and intervertebral disc pressure showed no significant difference between the two materials. Conclusion: PEEK screws demonstrated advantages over titanium screws and may serve as a viable alternative for screw materials in vertebra-pediculoplasty.

Identification of a potential novel biomarker in intervertebral disk degeneration by bioinformatics analysis and experimental validation.

Background: Intervertebral disk degeneration (IVDD) is a major cause of low back pain and one of the most common health problems all over the world. However, the early diagnosis of IVDD is still restricted. The purpose of this study is to identify and validate the key characteristic gene of IVDD and analyze its correlation with immune cell infiltration. Methods: 3 IVDD-related gene expression profiles were downloaded from the Gene Expression Omnibus database to screen for differentially expressed genes (DEGs). Gene Ontology (GO) and gene set enrichment analysis (GSEA) were conducted to explore the biological functions. Two machine learning algorithms were used to identify characteristic genes, which were tested to further find the key characteristic gene. The receiver operating characteristic curve was performed to estimate the clinical diagnostic value of the key characteristic gene. The excised human intervertebral disks were obtained, and the normal nucleus pulposus (NP) and degenerative NP were carefully separated and cultured in vitro. The expression of the key characteristic gene was validated by real-time quantitative PCR (qRT-PCR). The related protein expression in NP cells was detected by Western blot. Finally, the correlation was investigated between the key characteristic gene and immune cell infiltration. Results: A total of 5 DEGs, including 3 upregulated genes and 2 downregulated genes, were screened between IVDD and control samples. GO enrichment analysis showed that DEGs were enriched to 4 items in BP, 6 items in CC, and 13 items in MF. They mainly included the regulation of ion transmembrane transport, transporter complex, and channel activity. GSEA suggested that the cell cycle, DNA replication, graft versus host disease, and nucleotide excision repair were enriched in control samples, while complement and coagulation cascades, Fc γ R-mediated phagocytosis, neuroactive ligand-receptor interaction, the NOD-like receptor signaling pathway, gap junctions, etc., were enriched in IVDD samples. Furthermore, ZNF542P was identified and tested as key characteristic gene in IVDD samples through machine learning algorithms and showed a good diagnostic value. The results of qRT-PCR showed that compared with normal NP cells, the expression of ZNF542P gene was decreased in degenerated NP cells. The results of Western blot suggested that compared with normal NP cells, the expression of NLRP3 and pro Caspase-1 was increased in degenerated NP cells. Finally, we found that the expression of ZNF542P was positively related to the proportions of T cells gamma delta (γδT cells). Conclusion: ZNF542P is a potential biomarker in the early diagnosis of IVDD and may be associated with the NOD-like receptor signaling pathway and the infiltration of γδT cells.

Alterations in the microenvironment and the effects produced of TRPV5 in osteoporosis.

The pathogenesis of osteoporosis involves multiple factors, among which alterations in the bone microenvironment play a crucial role in disrupting normal bone metabolic balance. Transient receptor potential vanilloid 5 (TRPV5), a member of the TRPV family, is an essential determinant of the bone microenvironment, acting at multiple levels to influence its properties. TRPV5 exerts a pivotal influence on bone through the regulation of calcium reabsorption and transportation while also responding to steroid hormones and agonists. Although the metabolic consequences of osteoporosis, such as loss of bone calcium, reduced mineralization capacity, and active osteoclasts, have received significant attention, this review focuses on the changes in the osteoporotic microenvironment and the specific effects of TRPV5 at various levels.

Mining Potential Drug Targets for Osteoporosis Based on CeRNA Network.

OBJECTIVE: To identify key pathological hub genes, micro RNAs (miRNAs), and circular RNAs (circRNAs) of osteoporosis (OP) and construct their ceRNA network in an effort to explore the potential biomarkers and drug targets for OP therapy. METHODS: GSE7158, GSE201543, and GSE161361 microarray datasets were downloaded from Gene Expression Omnibus (GEO) database. Differentially expressed genes (DEGs) were identified by comparing OP patients with healthy controls and hub genes were screened by machine learning algorithms. Target miRNAs and circRNAs were predicted by FunRich and circbank, then ceRNA network were constructed by Cytoscape. Pathways affecting OP were identified by functional enrichment analysis. The hub genes were verified by receiver operating characteristic (ROC) curve and real time quantitative PCR (RT-qPCR). Potential drug molecules related to OP were predicted by DSigDB database and molecular docking was analyzed by autodock vina software. RESULTS: A total of 179 DEGs were identified. By combining three machine learning algorithms, BAG2, MME, SLC14A1, and TRIM44 were identified as hub genes. Three OP-associated target miRNAs and 362 target circRNAs were predicted to establish ceRNA network. The ROC curves showed that these four hub genes had good diagnostic performance and their differential expression was statistically significant in OP animal model. Benzo[a]pyrene was predicted which could successfully bind to protein receptors related to the hub genes and it was served as the potential drug molecules. CONCLUSION: An mRNA-miRNA-circRNA network is reported, which provides new ideas for exploring the pathogenesis of OP. Benzo[a]pyrene, as potential drug molecules for OP, may provide guidance for the clinical treatment.

Morphological Changes of Medial Epicondyle-Olecranon Ligament and Ulnar Nerve in the Cubital Tunnel Syndrome: An Ultrasonic Study.

OBJECTIVE: Few studies have performed detailed ultrasound measurements of medial epicondyle-olecranon (MEO) ligament that cause the entrapment of ulnar nerve. This study aims to comprehensively evaluate dynamic ultrasonographic characteristics of MEO ligament and ulnar nerve for clinical diagnosis and accurate treatment of cubital tunnel syndrome (CuTS). METHODS: Thirty CuTS patients (CuTS group) and sixteen healthy volunteers (control group) who underwent ultrasound scanning from October 2016 to October 2020 were retrospectively collected, with 30 elbows in each group. Primary outcomes were thickness at six points, length and width of MEO ligament. Secondary outcomes were thickness of ulnar nerve under MEO ligament at seven parts and the cross-sectional area (CSA) of ulnar nerve at proximal end of MEO ligament (P0 mm ). The thickness of MEO ligament and ulnar nerve in different points of each group was compared by one-way ANOVA analysis with Bonferroni post hoc test, other outcomes were compared between two elbow positions or two groups using independent-samples t test. RESULTS: Thickness of MEO ligament in CuTS group at epicondyle end, midpoint in transverse view, olecranon end, proximal end, midpoint in axial view, and distal end was 0.67 ± 0.31, 0.37 ± 0.18, 0.89 ± 0.35, 0.39 ± 0.21, 0.51 ± 0.38, 0.36 ± 0.25 at elbow extension, 0.68 ± 0.34, 0.38 ± 0.27, 0.77 ± 0.39, 0.32 ± 0.20, 0.48 ± 0.22, 0.32 ± 0.12 (mm) at elbow flexion, respectively. Compared with control group, they were significantly thickened except for proximal end at elbow flexion. MEO ligament thickness at epicondyle end and olecranon end was significantly larger than midpoint in two groups. No significant difference was found in length and width of MEO ligament among different comparisons. Ulnar nerve thickness at 5 mm proximal to MEO ligament (P5 mm , 3.25 ± 0.66 mm) was significantly increased than midpoint of MEO ligament (Mid), distal end of MEO ligament (D0 mm ), 5 mm (D5 mm ), 10 mm (D10 mm ) distal to MEO ligament at extension in CuTS group. Compared with control group, ulnar nerve thickness at P5 mm in CuTS group was significantly increased at extension position, at D5 mm and D10 mm was significantly decreased at flexion position. CSA of ulnar nerve at extension position (14.44 ± 4.65 mm2 ) was significantly larger than flexion position (11.83 ± 3.66 mm2 ) in CuTS group, and CuTS group was significantly larger than control group at two positions. CONCLUSIONS: MEO ligament in CuTS patients was thickened, which compressed ulnar nerve and caused its proximal end swelling. Ultrasonic image of MEO ligament thickness was a significant indicator for CuTS and can guide surgeons in selecting the appropriate treatment.

Effects of osteoporosis on the biomechanics of various supplemental fixations co-applied with oblique lumbar interbody fusion (OLIF): a finite element analysis.

BACKGROUND: Oblique lumbar interbody fusion (OLIF) is an important surgical modality for the treatment of degenerative lumbar spine disease. Various supplemental fixations can be co-applied with OLIF, increasing OLIF stability and reducing complications. However, it is unclear whether osteoporosis affects the success of supplemental fixations; therefore, this study analyzed the effects of osteoporosis on various supplemental fixations co-applied with OLIF. METHODS: We developed and validated an L3-S1 finite element (FE) model; we assigned different material properties to each component and established models of the osteoporotic and normal bone lumbar spine. We explored the outcomes of OLIF combined with each of five supplemental fixations: standalone OLIF; OLIF with lateral plate fixation (OLIF + LPF); OLIF with translaminar facet joint fixation and unilateral pedicle screw fixation (OLIF + TFJF + UPSF); OLIF with unilateral pedicle screw fixation (OLIF + UPSF); and OLIF with bilateral pedicle screw fixation (OLIF + BPSF). Under the various working conditions, we calculated the ranges of motion (ROMs) of the normal bone and osteoporosis models, the maximum Mises stresses of the fixation instruments (MMSFIs), and the average Mises stresses on cancellous bone (AMSCBs). RESULTS: Compared with the normal bone OLIF model, no demonstrable change in any segmental ROM was apparent. The MMSFIs increased in all five osteoporotic OLIF models. In the OLIF + TFJF + UPSF model, the MMSFIs increased sharply in forward flexion and extension. The stress changes of the OLIF + UPSF, OLIF + BPSF, and OLIF + TFJF + UPSF models were similar; all stresses trended upward. The AMSCBs decreased in all five osteoporotic OLIF models during flexion, extension, lateral bending, and axial rotation. The average stress change of cancellous bone was most obvious under extension. The AMSCBs of the five OLIF models decreased by 14%, 23.44%, 21.97%, 40.56%, and 22.44% respectively. CONCLUSIONS: For some supplemental fixations, the AMSCBs were all reduced and the MMSFIs were all increased in the osteoporotic model, compared with the OLIF model of normal bone. Therefore, the biomechanical performance of an osteoporotic model may be inferior to the biomechanical performance of a normal model for the same fixation method; in some instances, it may increase the risks of fracture and internal fixation failure.

Chinese Clinical Practice Guidelines in Treating Knee Osteoarthritis by Periarticular Knee Osteotomy.

Unicompartmental knee osteoarthritis (UKOA) is the early stage of knee joint degeneration, which is characterized by unicompartmental degeneration and mostly occurs in medial compartment. Pain and limited motion are main symptoms, which affect patients' life quality. Periarticular knee osteotomy (PKO) for lower extremity alignment correction is an effective treatment for UKOA with abnormal alignment, which could relieve pain and improve joint function by adjusting lower extremity alignment. At present, no clinical guidelines are available for the treatment of UKOA by PKO for lower extremity alignment correction. Experts from the Clinical New Technology Application Committee of the Chinese Hospital Association, Joint Surgery Study Group of the Chinese Orthopaedic Association of the Chinese Medical Association, and Osteoarthritis Study Group of the Chinese Association of Orthopaedic Surgeons of the Chinese Medical Doctor Association formulated these guidelines. The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) grading system and the Reporting Items for Practice Guidelines in Healthcare (RIGHT) were adopted to select 25 most concerning questions. Finally, 25 recommendations were formulated through evidence retrieval, evidence quality evaluation, and the determination of directions and strength of recommendations. Recommendation items 1-5 are indications and contraindications for PKO for lower extremity alignment correction, items 6-21 are surgical methods and principles, item 22 describes 3D printing corrective osteotomy technique, and items 23-25 address the perioperative period, follow-up management, and other content. These guidelines are designed to improve the normalization and standardization of KOA treatment by PKO for lower extremity alignment correction.

Intra-articular opening wedge osteotomy for varus ankle arthritis with computer-assisted planning and patient-specific surgical guides: a retrospective case series.

BACKGROUND: Computer-assisted preoperative planning, combined with PSI has become an effective technique for treating complex limb deformities. The purpose of this study was to evaluate the efficacy and safety of the novel technique in corrective osteotomy for intra-articular varus ankle deformities associated with osteoarthritis and ankle instability. METHODS: Nineteen patients with intra-articular varus ankle arthritis were reviewed between April 2017 and June 2019, including ten men and nine women with a mean age of 58.3 ± 9.9 years (range, 38 to 76 years). All patients underwent intra-articular opening wedge osteotomy assisted by 3D virtual planning and PSI. Weight-bearing radiographs were used to assess the radiographic results, including TAS angle, TT angle, TMM angle, TC angle, TLS angle, opening-wedge angle, and wedge height. Functional outcomes were assessed by the AOFAS score, VAS score, and ROM of the ankle. RESULTS: The average follow-up time was 32.2 ± 9.0 months (range, 22 to 47 months). The average union time was 4.4 ± 0.9 months (range, 3.0 to 6.5 months). The TAS angle significantly changed from 84.1 ± 4.6° preoperatively to 87.7 ± 3.1° at the 1-year follow-up and 86.2 ± 2.6° at the latest follow-up. Similarly, the TT angle, TMM angle and TC angle changed significantly at the 1-year follow-up compared with the preoperative assessment and remained stable until the last follow-up. However, the TLS was not corrected significantly. The postoperative obtained opening-wedge angle, and wedge height showed no significant change with preoperative planning. The overall complication rate was 15.8%. The mean VAS score improved from 5.3 ± 0.6 to 2.7 ± 0.7. The mean AOFAS score improved from 56.2 ± 7.6 to 80.6 ± 4.6. However, the ROM showed no significant change. CONCLUSIONS: Accurate correction and satisfactory functional recovery were attained with computer-assisted planning and PSI in the corrective osteotomy of intra-articular varus ankle deformities.

Biomechanical study of oblique lumbar interbody fusion (OLIF) augmented with different types of instrumentation: a finite element analysis.

BACKGROUND: To explore the biomechanical differences in oblique lumbar interbody fusion (OLIF) augmented by different types of instrumentation. METHODS: A three-dimensional nonlinear finite element (FE) model of an intact L3-S1 lumbar spine was built and validated. The intact model was modified to develop five OLIF surgery models (Stand-alone OLIF; OLIF with lateral plate fixation [OLIF + LPF]; OLIF with unilateral pedicle screws fixation [OLIF + UPSF]; OLIF with bilateral pedicle screws fixation [OLIF + BPSF]; OLIF with translaminar facet joint fixation + unilateral pedicle screws fixation [OLIF + TFJF + UPSF]) in which the surgical segment was L4-L5. Under a follower load of 500 N, a 7.5-Nm moment was applied to all lumbar spine models to calculate the range of motion (ROM), equivalent stress peak of fixation instruments (ESPFI), equivalent stress peak of cage (ESPC), equivalent stress peak of cortical endplate (ESPCE), and equivalent stress average value of cancellous bone (ESAVCB). RESULTS: Compared with the intact model, the ROM of the L4-L5 segment in each OLIF surgery model decreased by > 80%. The ROM values of adjacent segments were not significantly different. The ESPFI, ESPC, and ESPCE values of the OLIF + BPSF model were smaller than those of the other OLIF surgery models. The ESAVCB value of the normal lumbar model was less than the ESAVCB values of all OLIF surgical models. In most postures, the ESPFI, ESPCE, and ESAVCB values of the OLIF + LPF model were the largest. The ESPC was higher in the Stand-alone OLIF model than in the other OLIF models. The stresses of several important components of the OLIF + UPSF and OLIF + TFJF + UPSF models were between those of the OLIF + LPF and OLIF + BPSF models. CONCLUSIONS: Our biomechanical FE analysis indicated the greater ability of OLIF + BPSF to retain lumbar stability, resist cage subsidence, and maintain disc height. Therefore, in the augmentation of OLIF, bilateral pedicle screws fixation may be the best approach.

Efficacy and safety of intravenous combined with topical administration of tranexamic acid in reducing blood loss in opening wedge high tibial osteotomy procedure: A retrospective case-control study.

OBJECTIVE: This study aimed to evaluate the efficacy and safety of intravenous combined with topical application of tranexamic acid (TXA) in reducing blood loss in opening wedge high tibial osteotomy (OWHTO). METHODS: A total of 60 patients who underwent unilateral OWHTO between May 2018 and May 2019 were retrospectively reviewed. All the patients were then divided into one of the two groups (30 per group): the TXA group, patients receiving intravenous combined with topical application of TXA, and the control group, patients receiving no TXA. Outcome measures were drain volume, total blood loss, hidden blood loss, transfusion requirements, and incidence of complications. RESULTS: The mean follow-up of TXA group was 14.2 2.3 months (range, 13-16 months) and the mean follow-up for the control group was 14.4 2.1 months (range, 13-17 months). No significant difference was found for the follow-up of two groups (P=0.829). Drainage volume (143.3 65.4 ml vs 307.8 51.4 mL, P < 0.001), hidden blood loss (156.7 63.8 mL vs 286.4 79.1 mL, P < 0.001) and knee swelling (3.2 0.9 vs 6.5 2.1, P < 0.001) in the TXA group was clearly less than that in the control group, and there was no statistical significance with regard to hospitalization time (P=0.746), transfusion requirements (P=1.000), wound complications (P=0.386), deep venous thrombosis (P=1.000), postoperative Lysholm knee score (P=0.681) and Knee Injury and Osteoarthritis Outcome subscales pain (P=0.752), symptoms (P=0.673), activities of daily living (P=0.871), sport/recreation function (P=0.816), and knee-related quality of life (P=0.576) at 6 months postoperatively. CONCLUSION: This study has shown that administration of intravenous combined with topical TXA in OWHTO can effectively reduce perioperative blood loss without increasing the incidence of postoperative complications. LEVEL OF EVIDENCE: Level III, Therapeutic Study.

Effect of Resistance Training Combined with Beta-Hydroxy-Beta-Methylbutyric Acid Supplements in Elderly Patients with Sarcopenia after Hip Replacement.

OBJECTIVES: To evaluate the efficacy of resistance training (RT) combined with beta-hydroxy-beta-methylbutyric acid (HMB) in the treatment of elderly patients with sarcopenia after hip replacement. METHODS: From January 1, 2018 to December 31, 2018, 200 elderly patients (68 men, mean age 76.3 years and 137 women, mean age 79.1 years) who experienced femoral neck fracture with sarcopenia after hip arthroplasty were assigned to four groups: RT + HMB group, RT group, HMB group, and negative control group. Baseline data, body composition, grip strength, Barthel index (BI), Harris hip score (HHS), and visual analog scale score (VAS) were compared among the four groups before and 3 months after surgery. RESULTS: A total of 177 participants completed the trial, including 43 in the HMB + RT group, 44 in the HMB group, 45 in the RT group, and 45 in the negative control group. At the 3-month follow-up, the body composition and grip strength of the HMB + RT group and RT group were significantly improved compared with those before operation. The HMB group had no significant change, while the measures in the negative control group significantly decreased. Postoperative BI and HSS did not reach pre-injury levels in any of the four groups, but postoperative VAS score was significantly improved. However, there was no significant difference in BI, HSS, or VAS among the four groups. CONCLUSION: RT, with or without HMB supplementation, can effectively improve body composition and grip strength in elderly patients with sarcopenia after hip replacement at short-term follow-up. Simultaneously, use of exclusive HMB supplementation alone may also help to prevent decreases in muscle mass and grip strength in these patients.

Sustained release of naringin from silk-fibroin-nanohydroxyapatite scaffold for the enhancement of bone regeneration.

Bone defects are a common challenge in the clinical setting. Bone tissue engineering (BTE) is an effective treatment for the clinical problem of large bone defects. In this study, we fabricated silk fibroin (SF)/hydroxyapatite (HAp) scaffolds inlaid with naringin poly lactic-co-glycolic acid (PLGA) microspheres, investigating the feasibility of their application in BTE. Naringin PLGA microspheres were manufactured and adhered to the SF/HAp scaffold. Bone mesenchymal stem cells (BMSCs) were inoculated onto the SF/HAp scaffold containing naringin PLGA microsphere to examine the biocompatibility of the SF/HAp scaffolds. A rabbit femoral distal bone defect model was used to evaluate the in vivo function of the SF/HAp scaffolds containing naringin-loaded PLGA microspheres. The current study demonstrated that SF/HAp scaffolds containing naringin-loaded PLGA microspheres show promise as osteo-modulatory biomaterials for bone regeneration.